To flush a water heater, turn off the power or gas, shut off the cold water supply, and connect a hose to the drain valve. Drain the tank, flush out sediment with brief bursts of cold water, then refill and restore power. This DIY task takes 30–60 minutes and improves efficiency.

Why is my water heater making noises?

Water heater noises like popping, whistling, or rumbling are often caused by sediment buildup, loose components, or valve issues. Popping indicates sediment heating up, whistling suggests a restricted valve, and rumbling may point to a failing heating element. Regular maintenance, like flushing the tank, can prevent noises. For persistent issues, consult a professional plumber.

Discover how to replace your water heater with a tankless system in Colorado. This DIY guide covers sizing, installation steps, and benefits like energy savings and endless hot water.

Many cases of no hot water can be resolved with simple DIY fixes like resetting a tripped circuit breaker or relighting a pilot light. However, call a professional for gas leaks, major water leaks, or persistent issues after trying basic troubleshooting.

Common reasons for no hot water in your house include a faulty thermostat, a broken heating element (for electric heaters), or gas supply issues like a pilot light failure (for gas heaters). Check your thermostat setting, reset tripped circuit breakers, and relight the pilot light if necessary. 

To fix a leaky faucet, first, turn off the water supply. Remove the handle and unscrew the cartridge or washer. Replace worn-out parts, reassemble the faucet, and turn the water back on to test for leaks. 

Regular water heater maintenance is key to avoiding expensive repairs and ensuring efficient performance. By flushing the tank, checking for leaks, and inspecting the anode rod, you can extend your water heater's lifespan and improve energy efficiency. Discover the best practices for DIY maintenance and when to call a professional.

A leaking hot water heater can be caused by a faulty drain valve, excessive pressure, corrosion, or loose connections. To fix it, identify the source of the leak, tighten connections, replace faulty parts, or consider a full replacement if the tank is damaged.

To fix a leaky sink drain pipe, start by identifying the source of the leak. Tighten any loose connections, replace worn-out washers, and apply plumber’s tape or sealant to threaded areas. If necessary, replace the damaged pipe with a new one. Be sure to check all connections for a secure fit.

Low water pressure in a home can be caused by several factors, including clogged pipes, leaks, corroded plumbing, faulty pressure regulators, or municipal water supply issues. Regular maintenance and prompt repairs can help restore optimal water flow.

A standard tank water heater lasts about 8-12 years, while tankless water heaters can last 20+ years with proper maintenance. Factors such as water quality, usage, and regular upkeep play a significant role in their lifespan."

Storm drains don’t take holidays, and neither should their cleaning. Find out why waiting for rain to care for your drains might be the most expensive mistake you’re making!

Permits for water heater replacements aren’t optional—they’re the law. Skip one, and you’re not just breaking rules; you’re risking fines, warranties, and your sanity. Let’s clear the confusion (and save your wallet).

Sewer drain clogs are stubborn little nightmares that refuse to leave. Before you pour another “quick fix” down the drain, let’s talk about what actually works to kick that clog out for good.

Replacing a water heater typically costs between $800 and $3,500, depending on factors such as the type (tank vs. tankless), size, energy efficiency, and installation requirements. Consider consulting a professional for accurate estimates and to discuss the best options for your home.

Ignoring your tankless water heater condensate drain is like stuffing cash down your garbage disposal. A quick fix now can save you from a wallet-wrecking nightmare later—because who really wants a $10,000 surprise?

Ignoring those weird plumbing noises in your pipes? You might want to rethink that—because those innocent noises could be plotting the most expensive plumbing disaster of the year.

Let’s get one thing straight: if you’re treating your tankless water heater like it’s invincible, winter’s about to have a very icy surprise for you. Forget to prep it properly, and you might as well start practicing your cold-shower routine now—just in case. Winter doesn’t care about your comfort, and neither does freezing water. But here’s the good news: preparing your tankless water heater for winter isn’t complicated, and doing it right keeps your hot water flowing without making your heater work overtime. Want to avoid turning your heater into an expensive paperweight this winter?

Stick around.

Plumbing’s simple, right? Just a wrench here, a pipe there, and voilà—you’re set for life.

Well, if only. Behind the scenes of your seemingly smooth-running taps and drains lurks a dirty little secret: not all residential plumbing services are created equal. Some plumbers will fix your leak, smile, and leave you with a ticking time bomb under your sink. But don’t worry—we’re spilling the beans on the shortcuts, the half-baked fixes, and the things your plumber definitely won’t mention over coffee.

So, you’ve been sold the dream of endless hot showers and a utility bill that won’t leave you sweating—sounds great, right? But before you kick back and bask in the glory of your tankless water heater, let’s have a quick reality check. What if that promise of 'forever hot water' is more like a sales pitch than a guarantee? The truth is, your sleek, space-saving unit might have a few tricks up its sleeve that could turn your steamy sanctuary into a lukewarm disappointment.

But hey, don’t reach for the cold shower cap just yet. In this blog, we’ll dig into the common mistakes of tankless water heaters and why regular maintenance is your best bet to keep those repair bills from making an unexpected splash in your budget.